Kitchens / Indoor kitchens / On-Off ST
On-Off ST
Design: Alberto Colonello
The ON-OFF ST modular kitchen is characterised by a self-standing structure equipped with folding door, which opens upwards electronically, revealing the worktop area inside. Once closed, it completely conceals the working area, transforming the kitchen into a monolithic furniture piece. The base units are available with or without handles and a tall unit with side-recessing door can be positioned next to them. The On-Off St folding door, which hides the worktop, is equipped with an electronic mechanism that allows for smooth opening and complete disappearance from view. This feature transforms the kitchen into an elegant design element when closed, while maintaining all the functionality of a modern kitchen.
Base unit doors with no handle can be supplied, with the push opening system Tip-On.
A folding door opens upwards electronically and unveils everything that is needed in the kitchen.
The working area can be fitted with back panel, shelves, open-faced units, hood and a suspended compartment for oven. The oven can also be installed in tall unit.
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Solvent-based matt lacquer. Features: • Solvent-base polyurethane coating • Base coat of polyester. • One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI
O_STEEL SILVER
O_STEEL
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
AISI 304 box section stainless steel sheet.
PRE-SATIN
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
OAK WITH KNOTS
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
AISI 304 box section stainless steel sheet.
MATT-SATIN
AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI
O_STEEL SILVER
O_STEEL
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
DOMOOS
SIRIUS BLACK
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
QUARTZITE BRECCIA IMPERIALE
VERDE ALPI MARBLE
ROSSO LEPANTO MARBLE
ITALIA GREY MARBLE
QUARTZITE SPIDER BLACK
SUPERWHITE MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
QUARTZITE CALACATTA
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOR DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE GRANITE
WHITE CARRARA MARBLE
GREY LAVA STONE
PLINTH
Characteristics
Height
80 - 100 MM
Finishes
-
PAINTED MATT WHITE
-
STAINLEES STEEL
-
PAINTED MATT BLACK
-
silcolak
-
ecolak
-
clay
-
easy-metals
-
metals
Request More Info
Complete the Indoor kitchens On-Off ST
View More