Twenty years separate the original CASE 5.0 system from its latest offering. During this time, technology and design have advanced considerably, allowing Boffi and Piero Lissoni the opportunity to do further research and receive feedback from the client. The reinterpretation of forms resulted in an evolution towards the CASE 5.0 - BECOMING in 2022. This year, one can find additional functional and aesthetic features.
Leaving behind the kitchen, the memorable shapes of CASE 5.0 are reproposed for a bathroom system with two variants: a monobloc version and a wall version with supporting shelves. For the wall compositions, the containers are only available with an H300-mm side with pull-out base units and 5-cm doors, replicating the thicknesses of the kitchen model but with side panels that are 5cm instead of 9cm. Like its kitchen variant, the CASE 5.0 BATH bathroom has the same offering of finishes, including the novel mirrored glass and spatulated clay finishes.
Coated with high quality resin.
The Boffi melamine-coated carcasses have the structure made of wood suitable for humid environments for internal use particle board panel with low formaldehyde emission.
Only for carcass.
THERMO-TREATED LARCH WOOD
ELM WOOD
GREY-GRAPHITE OAK
Water-based textured matt lacquer.
The following features make SILCOLAK a top-quality finish:
• Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance (tested in laboratories).
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer.
Features:
The following features make ECOLAK a top-quality finish:
• Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi.
• Colour range, exclusive for Boffi.
• Excellent chemical and physical resistance – tested in laboratories.
• Very low yellowing effect over time.
• Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage.
• Base coat of polyester.
• Coat of isolating paint Primer for corners and edges.
• Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
ARTIC WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ECOWOOD XILO 2.0 STRIPED BLACK
ECOWOOD XILO 2.0 PLANKED GREY
ECOWOOD XILO 2.0 PLANKED SAND
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY
ECOWOOD INDIAN ROSEWOOD
SMOKED OK
CANALETTO WALNUT U.S.
CORE WALNUT
AMERICAN ELM
Fossil oak wood found in river basins, result of thousands of years of underwater conservation, which gives the
wood several properties including hardness and giving it distinct light to dark colours tones, unique grains that enhance the wood rarity and the special design.
FOSSIL OAK
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax.
The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again.
Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites).
In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints.
Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain.
The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood.
Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
Tempered glass 4mm
MIRROR BLACK
MIRROR COFFEE
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn).
Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics:
• Resin of natural origin, obtained from corn.
• Weight reduction (approx. -30%) and unaltered robustness.
• Reduced consumption of CO2 emissions generated by transport.
WHITE
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface.
The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
KERANIUM
DOMOOS
GALERNA BROWN
STRTO GREY
SIRIUS BLACK
EDORA BEIGE
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish.
The decorative design is on the front surface only.
Features:
- Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties.
- Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould.
- Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate.
- Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
GREY ITALY
QUARZITE SPIDER BLACK
SUPERWHITE MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
QUARZITE CALACATTA
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOR DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE
WHITE CARRARA MARBLE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.