Case 5.0 Bath
Design: Piero Lissoni
The Future of Designer Bathrooms. Boffi and Lissoni present CASE 5.0, an evolution in bathroom design that reflects twenty years of technological innovation and consumer feedback. Sleek design and state-of-the-art performance come together in this unique bathroom system.
CASE 5.0 offers two variations: an impressive single-unit version and a wall system with practical and refined shelves. The wall versions feature 300mm-high drawers and 5cm-thick front panels that matches the dimensions of the CASE 5.0 kitchen.
Refined Materials
This bathroom system stands out for the variety of the finishes available, including mirrored glass and a trowelled texture coating, which add a touch of elegance and modernity. The selection of materials reflects Boffi’s commitment to creating modern bathroom settings that are both practical and stylish.
Evolution in Bathroom Design
CASE 5.0 is a step forward in bathroom design, combining the latest trends in style and performance. The fusion of the design language of kitchen and bathroom encapsulates Boffi and Lissoni’s innovative approach.
With CASE 5.0 Boffi establishes new bathroom design standards. This system is perfect for anyone seeking bathroom décor at the forefront of design and technology, offering tailor-made solutions for the modern home.
Technical Details
BASE UNITS
Characteristics
Made of 19 mm thick wood particle board panels, waterproof, with low formaldehyde emission treated with high performance melamine resin.
Height
300 / 470 MM
Depth
470 MM
Width
300 / 450 / 600 / 900 / 1200 MM
Finishes
-
THERMO-TREATED LARCH WOOD
-
ELM WOOD
-
GREY-GRAPHITE OAK
CASE 5.0
Thickness 50 mm
SQUARE EDGED WORKTOPS
Thickness 12 / 20 mm
CASE 5.0 - HANDLE-RAIL
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface. The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
ARA
SIRIO
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
FOREST GREY
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Tempered glass
MIRROR BLACK
MIRROR COFFEE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
SILCOLAK
ECOLAK
CLAY
POLYESTER
EASY METALS
GLASS
CORIAN®
WOOD VENEER
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
It is a solid surface consisting of mineral fillers of high purity aluminium tri-hydrates, bound by Biobased® resins of vegetable origin (corn). Boffi uses Biobased Cristalplant® of the latest generation, with the following characteristics: • Resin of natural origin, obtained from corn. • Weight reduction (approx. -30%) and unaltered robustness. • Reduced consumption of CO2 emissions generated by transport.
WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
DOMOOS
SIRIUS BLACK
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
BLACK LAVA STONE
ITALIA GREY MARBLE
QUARTZITE SPIDER BLACK
SUPERWHITE MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
QUARTZITE CALACATTA
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOR DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE GRANITE
WHITE CARRARA MARBLE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
SMOKED DYED OAK SW
OLD GREY PINEWOOD
CANALETTO LIGHT WALNUT "SAWN-EFFECT"
AMERICAN ELM SW
CRISTALPLANT®
LASERMAT
DEKTON® COMPOSITE
MDI COMPOSITE
CORIAN®
STONE-MARBLE-GRANITE
SOLID WOOD
Fisher Island XL Stone
Universal
Sidel Stone
Sabbia BTM
Sabbia 6 - 7
Sabbia 3
RD1
Pietra
Lotus
Kupa
Iceland
Garden
Fisher Island
Cathino 3 Stone
A45
Request More Info
Complete the Bathroom models Case 5.0 Bath
View More
