Aprile

Design: Piero Lissoni

The Aprile kitchen is a project designed to emphasize the value of using natural materials: finishes in treated wood, stainless steel and stone in different thicknesses, which create new solutions for worktops and peninsular dining areas. The doors and fronts are protected by a protrusion on the upper side which perfectly matches the worktop, made with a specific shape, so that its profile resembles a line of a few millimetres. It is possible to choose between doors with handle, without handle or with handle integrated into the thickness of the door. Aprile is characterized by 3D type doors, made with solid or veneered wood slats in different widths and thicknesses, in order to create a 3D effect with the handle, recessed into the thickness of the door. The doors are treated with natural oil. This kitchen is also completed by extractor hoods that use an innovative installation system; solid wood snack counters with stainless steel legs; overhead units per day; wall units with sliding doors and integrated lights; elements used between the worktop and snack counter. Aprile is the ideal choice for those who want a kitchen that combines design, innovation and respect for natural materials. Every detail has been thought of to create a unique experience, where elegance meets everyday practicality. With its ability to adapt to both open spaces and more traditional kitchens, Aprile has set a new standard in the world of modern kitchen design. From the slight detachment of the worktop to the fronts with clean lines, every element of this kitchen is a tribute to the artistic vision of Piero Lissoni and the craftsmanship of Boffi.

A Style Detail

The Sloane handle, also designed to enhance the use of natural materials, is testimony to Boffi’s commitment to offering design solutions that are both functional and beautiful to look at.

Continuous Innovation

The work on materials, surfaces and finishes is constantly aimed at innovation. Aprile is a point of reference in the sector for those looking for a kitchen that is not only functional and spacious, but also a real piece of design.

Technical Details

CARCASS

BASE UNITS

Characteristics

Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.

Height

790 MM

Depth

320 / 600 MM

Width

150 / 300 / 450 / 600 / 900 / 1200 MM

Finishes

ELM WOOD
THERMO-TREATED LARCH WOOD
GREY-GRAPHITE OAK

DOORS AND FRONT PANELS

SQUARE EDGED DOOR Thickness 23 mm

AMX DOOR Thickness 18 – 23 mm

WORKTOPS

APRILE Thickness 6 / 10 / 12 mm visible

HANDLES

APRILE 2

GRAND CHEF

HANDLE

STEEL

T LINE

WK6

FRAMES

SHADES

DUEMILAOTTO

X12 – X36

X3D

X3L

GRIP

GRIP WOOD

YARD

ZONE

INTEGRATED SHADES

SLOANE 1

SLOANE 2

SLOANE 3 – 4

AMX

FRONT FINISHES

The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.

LACQUERED LASERMAT CLAY WOOD COMPOSITE ALUMINIUM METAL OF DE CASTELLI STAINLESS STEEL CORIAN® GLASS STONE-MARBLE-GRANITE

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).

BEIGE LUXOR

BEIGE ARIZONA

INGO BLACK

ORINOCO COCOA

BLUE FES

BROMO GREY

JAIPUR RED

COMODORO GREEN

LONDON GREY

ANTRIM GREY

EFESO GREY

MALÈ WHITE

KOS WHITE

Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

RED RIBES

JET BLACK

ABYSS BLACK

SLATE GREY

SLIT

ROPE

HAY

GRAVEL GREY

LUTON GREY

OYSTER-PEARL

PAROS WHITE

SIBERIA WHITE

MYRTUS GREEN

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BLACK

CHARCOAL

BASALT GREY

MUD

ÈCRU

OAT

PEBBLE GREY

CLOUD

MAGNOLIA

WARM WHITE

ARTIC WHITE

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

FOREST GREY

PETRA RED

JODHPUR BLUE

CALIGO GREEN

MILKY MINT

BLACK

DEEP GREY

ELEGANT GREY

GREY

GREY RAL 7038

SAND

ROPE

PEBBLE GREY

MAGNOLIA

WHITE

Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.

LEAD RAYÈ

BRONZE RAYÈ

ANCIENT BRONZE RAYÈ

BRONZED BRASS RAYÈ

BRASS RAYÈ

COPPER RAYÈ

LEAD

TITANIUM

COPPER+

VINTAGE BRASS

ZINC+

ALUMINIUM

WHITE

Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.

DeErosion points K1 COPPER

DeErosion points K2 BRASS

DeErosion Freehand 2.0 K5 COPPER

DeErosion Freehand 2.0 K6 BRASS

DeOdd HAMMERED K3 STAINLESS STEEL

SATIN BRASS F1

ORBITAL DeLabrè G4 COPPER

DELABRÈ G5 COPPER

STRIPPED DeLabrè G7 BRASS

DeLabrè F2 BRASS

DeOdd K4 STAINLESS STEEL

ORBITAL DeLabrè G2 STAINLESS STEEL

STRIPPED DeLabrè 7022 F12 STAINLESS STEEL

DeLabrè B E5 STAINLESS STEEL

Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

YORK

NEWLYN

BLACK POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

BIHARA (Exclusive Boffi finish)

BLACK

GREY

CAMEL

WHITE

Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.

ALPINE WHITE OAK

ECOWOOD TEAK

ECOWOOD DATUK EBONY (10.44)

ECOWOOD INDIAN ROSEWOOD (10.23)

SMOKED OAK

CANALETTO WALNUT U.S.

AMERICAN ELM

ECOWOOD XILO 2.0 STRIPED BLACK (18.04)

ECOWOOD XILO 2.0 PLANKED GREY (18.23)

ECOWOOD XILO 2.0 PLANKED SAND (18.22)

GREY-GRAPHITE-OAK

ASH-GREY-OAK

OAK

FOSSIL OAK

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.

BLACK MARQUINIA

VERDE ALPI MARBLE

New

ROSSO LEPANTO MARBLE

ABSOLUTE BLACK ZIMBABWE GRANITE SAWN EFFECT

WHITE CARRARA MARBLE SAWN EFFECT

ABSOLUTE BLACK ZIMBABWE GRANITE SHADES

WHITE CARRARA MARBLE SHADES

ITALIA GREY MARBLE

APPLE BLOSSOM WHITE LASA MARBLE

GREY CARNICO MARBLE

GREY STONE MARBLE

EMPERADOR DARK MARBLE

BLACK COSMIC GRANITE

ABSOLUTE BLACK ZIMBABWE GRANITE

WHITE CARRARA MARBLE

EASYLAK+

LASERMAT

SILCOLAK

ECOLAK

CLAY

POLYESTER

EASY METALS

METALS

SOLID WOOD 3D

DEKTON® COMPOSITE

ALUMINIUM PLUS

TRACEWOOD

METAL OF DE CASTELLI

MDI COMPOSITE

O_STEEL

O_STEEL, SOLID WOOD EDGE

STAINLESS STEEL, SOLID WOOD EDGE

WOOD VENEER

CORIAN®

STAINLESS STEEL

WOOD VEENER 3D

SOLID WOOD

GLASS

STONE-MARBLE-GRANITE

WORKTOP FINISHES

The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.

STAINLESS STEEL COMPOSITE CORIAN® STONE-MARBLE-GRANITE