Informations Finishes Download

Indoor Kitchens | Case 5.0

Design: Piero Lissoni

BECOMING

Twenty years separate the original Case 5.0 system from its newest offering. During this time, technology and design have advanced considerably, allowing Boffi and Piero Lissoni the opportunity to do further research and receive feedback from the client. The reinterpretation of forms resulted in an evolution towards the CASE 5.0 - BECOMING in 2022. This year, one can now find additonal functional and aesthetic features.

For example, now there is the option of having cabinet doors built specifically for CASE 5.0 in 6mm glass with a folding effect in which the glass covers the entire structure of the door and front handle to give continuity to the material. Four shades of the applicable reflective glass are offered: coffee, grey, black and dove grey. These new finishes are joined by the new spatulated resin that can be applied to the doors in the color variants Hydra, Columbia, Pegaso, Lyra and Andromeda.
Boffi also introduces for the CASE 5.0 the CASE 5.0 Sliding peninsulas equipped with a frame with sliding guides, mounted directly on the kitchen top, that allow for three types of sliding: lateral, frontal and oblique to create cantilevered areas that are practical for food prep and service.
The dimensions of CASE 5.0 allow for sinks of equal importance and capacity. As a result, there are new configurations in stainless steel, or as an undertop in marble, MDi composite by Inalco and granite. The property of the materials permits them to be moulded into a single basin with strainer, double basin or 1- meter sink in addition to the basins already present in the Boffi offer.

The top includes the MDi Induction cooking system and the choice of sinks of important dimensions.

CASE 5.0 doors can be covered in 6mm glass with a folding effect in which the glass covers the entire structure of the door and front handle to give continuity to the material.

Technical Details

CARCASS

BASE UNITS

Characteristics

Made of 19 mm thick wood particle board panels, waterproof, with low formaldehyde emission treated with high performance melamine resin.

Height

790 MM

Depth

470 / 600 MM

Width

450 / 600 / 900 / 1200 MM

Finishes

ELM WOOD
THERMO-TREATED LARCH WOOD
GREY-GRAPHITE OAK

DOORS AND FRONT PANELS

CASE 5.0 Thickness 50 mm

WORKTOPS

SQUARE EDGED WORKTOPS Thickness 12 / 20 / 40 / 60 mm

HANDLES

CASE 5.0

FINISHES

WOOD LACQUERED LASERMAT STAINLESS STEEL STONE-MARBLE-GRANITE CLAY GLASS COMPOSITE CORIAN

Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).

BEIGE LUXOR

BEIGE ARIZONA

INGO BLACK

ORINOCO COCCA

BLU FESS

BROMO GREY

JAIPUR RED

COMODORO GREEN

LONDON GREY

ANTRIM GREY

EFESO GREY

MALÈ WHITE

KOS WHITE

Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

JET BLACK

ABYSS BLACK

SLATE GREY

SLIT

ROPE

HAY

GRAVEL GREY

LUTON GREY

OYSTER-PEARL

PAROS WHITE

SIBERIA WHITE

MYRTUS GREEN

Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.

BLACK

CHARCOAL

BASALT GREY

MUD

ÈCRU

OAT

PEBBLE GREY

CLOUD

MAGNOLIA

WARM WHITE

ARTIC WHITE

The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.

PETRA RED

JODHPUR BLUE

CALIGO GREEN

MILKY MINT

BLACK

DEEP GREY

ELEGANT GREY

GREY

GREY RAL 7038

SAND

ROPE

PEBBLE GREY

MAGNOLIA

WHITE

Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.

LEAD RAYÈ

New

BRONZE RAYÈ

New

ANCIENT BRONZE RAYÈ

New

BRONZED BRASS RAYÈ

New

BRASS RAYÈ

New

COPPER RAYÈ

New

LEAD

TITANIUM

COPPER+

VINTAGE BRASS

ZINC+

ALUMINIUM

WHITE

ALUMINIUM

Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.

GREY ITALY

New

QUARZITE SPIDER BLACK

SUPERWHITE MARBLE

APPLE BLOSSOM WHITE LASA MARBLE

QUARZITE CALACATTA

GREY CARNICO MARBLE

GREY STONE MARBLE

EMPERADOS DARK MARBLE

BLACK COSMIC GRANITE

ABSOLUTE BLACK ZIMBABWE

WHITE CARRARA MARBLE

QUARZITE SKY GOLD

GREY LAVA STONE

Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.

BLACK POINTS (Exclusive Boffi finish)

BLACK CROSS (Exclusive Boffi finish)

CAMEL POINTS (Exclusive Boffi finish)

CAMEL CROSS (Exclusive Boffi finish)

KANRAN (Exclusive Boffi finish)

SURREY (Exclusive Boffi finish)

DEVON (Exclusive Boffi finish)

BIHARA (Exclusive Boffi finish)

BLACK

GREY

CAMEL

WHITE

MELAMINE-COATED

EASYLAK+

LASERMAT

SILCOLAK

ECOLAK

WOOD

WOOD EXCLUSIVE

POLYESTER

EASY METALS

METALS

STAINLESS STEEL

O_STEEL

STONE-MARBLE-GRANITE

CLAY

GLASS

WOOD SELECTION

DEKTON® COMPOSITE

MDI COMPOSITE

CORIAN®

PLINTH

Characteristics

Made of extruded aluminium profile, in stainless steel or painted finishes, with a patented mechanism for height and depth regulation. Optional coverings in stone / marble / granite / composite are available.

Height

80 – 120 MM

Finishes