Xila
Design: Luigi Massoni C.R.S Boffi
Modular kitchen system designed by Luigi Massoni in 1972, recognized among the masterpieces of Italian design as the first kitchen available without handle. The door opening on the base units is allowed by a shaped aluminium profile (upper handle-rail). The base units, with two or more drawers, can be fitted with a middle handle-rail or a push-opening, giving a minimalist design aspect.
The tall units can be opened through vertical aluminium profile spacers on the sides. Worktops, panels and fronts are available in a wide range of finishes. Over the years this kitchen has been updated with new materials, including painted frosted glass (doors and tops) and aluminium (doors), becoming always more sophisticated and textured.
Year by year, the system adds new materials and finishes, like the Freehand finish, for a tactile and refined signature.
Frontrunner in the kitchen: it was the first to showcase wall and base units without handles and with a simple pressure opening.
Xila kitchen is now available in the new composite MDI: a high-performance material, made of high-purity minerals soft to the touch, hygienic and nontoxic, highly resistant, made of recycled materials, so totally ecological. The recessed worktop with lowered portion that includes the built-in equipped track Inside System Top, can have multiple functions thanks to compatibility with Inside accessories, the elegant long hanging bar for ladles or other accessories, equipped with LED lighting and the totally integrated downdraft hood.
Technical Details
BASE UNITS
Characteristics
Made of 19 mm thick wood particle board panels, suitable for damp spaces indoors and with low formaldehyde emission, treated with high performance melamine resin.
Height
790 MM
Depth
320 / 600 MM
Width
150 / 300 / 450 / 600 / 900 / 1200 MM
Finishes
-
ELM WOOD
-
THERMO-TREATED LARCH WOOD
-
GREY-GRAPHITE OAK
SQUARE EDGED DOOR
Thickness 23 mm
AMX DOOR
Thickness 18 – 23 mm
SQUARE EDGED WORKTOPS
Thickness 12 / 20 / 40 / 60 mm
INSIDE SYSTEM TOP
Thickness 60 mm
HANDRAIL
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Solvent-based matt lacquer. Features: • Solvent-base polyurethane coating • Base coat of polyester. • One paint coat, cross-applied
LEEDS GREY
CORTINA WHITE
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Water-based textured matt lacquer. The following features make SILCOLAK a top-quality finish: • Water-based textured paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance (tested in laboratories). • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
RED RIBES
JET BLACK
ABYSS BLACK
SLATE GREY
SLIT
ROPE
HAY
GRAVEL GREY
LUTON GREY
OYSTER-PEARL
PAROS WHITE
SIBERIA WHITE
MYRTUS GREEN
Water-based “soft touch” matt lacquer. Features: The following features make ECOLAK a top-quality finish: • Water-based “soft touch” paint, bi-component and undiluted (not contaminated by external agents), designed and produced exclusively for Boffi. • Colour range, exclusive for Boffi. • Excellent chemical and physical resistance – tested in laboratories. • Very low yellowing effect over time. • Coat of isolating paint Primer and double layers of polyester plastering, ideal for reducing small imperfections on surfaces and allowing a better coverage. • Base coat of polyester. • Coat of isolating paint Primer for corners and edges. • Two paint coats, cross-applied.
BLACK
CHARCOAL
BASALT GREY
MUD
ÈCRU
OAT
PEBBLE GREY
CLOUD
MAGNOLIA
WARM WHITE
ARTIC WHITE
Raw clay mixed with resin. The compound is applied by hand with a spatula, creating a very elegant and refined texture that is exclusive and unique for each surface. The manual trowelling may generate slight differences in thickness on the finished product. This process makes each piece unique and unrepeatable.
ARA
SIRIO
PEGASO
LYRA
HYDRA
COLUMBIA
ANDROMEDA
The polyester lacquering is carried out by a process of applying paints on MDF panels, with several coats. The surfaces are sanded with different coarse-grained and fine-grained sandpapers. Then they are polished using brushes impregnated with abrasive wax. The result obtained is a very glossy surface (close to the mirror effect) that reaches 95 gloss. Polyester is a very resistant material, practically waterproof; its surface does not absorb, but is sensitive to scratches. The scratched surface can be re-smoothed and re- polished or even repaired adding material and then by sanding and smoothing it again. Three layers of paint coat each surface, it means 900 g/m2 (ca. 1 mm thick); nine layers of paint coat each edge (ca. 3 mm thick). It is sensitive to light if directly exposed for very long periods. It can slightly change the tone, becoming lighter especially on light tones (family of whites). In case of element additions in a second moment, these tone changes cannot be perfectly replicated and may not match exactly the original shade. This issue cannot be considered cause for a complaint.
FOREST GREY
PETRA RED
JODHPUR BLUE
CALIGO GREEN
MILKY MINT
BLACK
DEEP GREY
ELEGANT GREY
GREY
GREY RAL 7038
SAND
ROPE
PEBBLE GREY
MAGNOLIA
WHITE
Metal-effect lacquer. Easy Metals is a finishing that reproduces the typical effect of metallic surfaces, obtained by use of metal particles-enriched solvent-based paints. Variations in brightness (halos caused by the spread of the paint metal particles along the surface) make each piece a unique and exclusive.
LEAD CLASS
COPPER DARK
IRON LUXURY
ZINC GLAM
SILVER STYLE
Metal-effect lacquer. Metals is a special finishing which reproduces the typical effect of brushed metallic surfaces, rendered through a very precise and technical sequence of production cycles. The characteristic metallic effect of the surface is given by the alternation of manual and mechanical processes, by the quality of the metal particles-enriched solvent-based paints and by the complex drying procedure. The various shades of colour (halos caused by the spread of the paint chromium particles) and the succession of multi-directional brushing of the surface make each piece a unique and exclusive one.
LEAD RAYÈ
BRONZE RAYÈ
ANCIENT BRONZE RAYÈ
BRONZED BRASS RAYÈ
BRASS RAYÈ
COPPER RAYÈ
LEAD
TITANIUM
COPPER+
VINTAGE BRASS
ZINC+
ALUMINIUM
WHITE
AISI 304 box section stainless steel sheet.
MATT-SATIN
PRE-SATIN
Aluminium sheet. Epoxy powder-coated finish.
DARK TOBACCO
DRY BLACK
Veneer reconstructed textured Eco-wood. Finished with water-based paint. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
CROSS ECOWOOD XILO 2.0 STRIPED BLACK
CROSS ECOWOOD XILO 2.0 PLANKED SAND
Exclusive-appearance metal sheet obtained with special chemical and / or mechanical treatments. For generations the “mission” of De Castelli has been to enhance the natural metals such as iron, steel, brass and copper, making them unique thanks to dedicated and sophisticated mechanical or chemical treatments. The chromatic and aesthetic effects created are peculiar and highly distinctive. The metals of De Castelli are protected only by transparent paints, in full respect of the core of the metal used.
DeErosion points K1 COPPER
DeErosion points K2 BRASS
DeErosion Freehand 2.0 K5 COPPER
DeErosion Freehand 2.0 K6 BRASS
DeOdd HAMMERED K3 STAINLESS STEEL
SATIN BRASS F1
ORBITAL DeLabrè G4 COPPER
DELABRÈ G5 COPPER
STRIPPED DeLabrè G7 BRASS
DeLabrè F2 BRASS
DeOdd K4 STAINLESS STEEL
ORBITAL DeLabrè G2 STAINLESS STEEL
STRIPPED DeLabrè 7022 F12 STAINLESS STEEL
DeLabrè B E5 STAINLESS STEEL
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
DOMOOS
SIRIUS BLACK
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
Solid wood layers. The special FREEHAND door (design Piero Lissoni) is characterized by horizontal furrows, spaced out irregularly. Horizontal grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
Solid wood layers, with support made of strip wood. The special SHADES door is characterized by vertical furrows, spaced out regularly. Vertical grain. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
SMOKED DYED OAK SW
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT
AMERICAN ELM SW
AISI 304 stainless steel sheet, solid wood edge. Edge feasible in: American elm SW / Canaletto LIGHT walnut (without “sawn effect”) / Olivato ash wood SW / Thermo-treated Olivato ash wood SW / Smoked dyed oak SW.
PRE-SATIN STAINLESS STEEL
AISI 304 stainless steel sheet, orbital satin (Orbital Steel), solid wood edge. Edge feasible in: American elm SW / Canaletto LIGHT walnut (without “sawn effect”) / Olivato ash wood SW / Thermo-treated Olivato ash wood SW / Smoked dyed oak SW.
O_STEEL SILVER
O_STEEL
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
VERDE ALPI MARBLE
ROSSO LEPANTO MARBLE
ABSOLUTE BLACK ZIMBABWE GRANITE SAWN EFFECT
WHITE CARRARA MARBLE SAWN EFFECT
ABSOLUTE BLACK ZIMBABWE GRANITE SHADES
WHITE CARRARA MARBLE SHADES
ITALIA GREY MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOR DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE GRANITE
WHITE CARRARA MARBLE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
ALPINE WHITE OAK
ECOWOOD TEAK (10.74)
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
CANALETTO WALNUT U.S.
AMERICAN ELM
GREY-GRAPHITE OAK
AHS-GREY OAK
OAK
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
CANALETTO LIGHT WALNUT
SMOKED DYED OAK SW
OLD GREY PINEWOOD
CANALETTO LIGHT WALNUT "SAWN-EFFECT"
AMERICAN ELM SW
Tempered glass
EXTRALIGHT PAINTED COFFEE (frosted or sanded)
EXTRALIGHT PAINTED DOVE GREY (frosted or sanded)
EXTRALIGHT PAINTED WHITE (sanded or frosted)
EASYLAK+
LASERMAT
SILCOLAK
ECOLAK
CLAY
POLYESTER
EASY METALS
METALS
STAINLESS STEEL
ALUMINIUM PLUS
TRACEWOOD
METAL OF DE CASTELLI
DEKTON® COMPOSITE
MDI COMPOSITE
SOLID WOOD FREEHAND
SOLID WOOD SHADES / MINISHADES
STAINLESS STEEL, SOLID WOOD EDGE
O_STEEL, SOLID WOOD EDGE
STONE-MARBLE-GRANITE
WOOD VENEER
CORIAN®
WOOD VEENER 3D
SOLID WOOD
GLASS
The range of Boffi materials and their compatibility with individual products are constantly evolving: check with your dealer for the actual availability of the product in the desired finish.
Nanotechnological matt “soft touch” FENIX NTM® surface. FENIX NTM® The exterior decorative surface is obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view. FENIX NTM® UNICOLOR Obtained starting from thermosetting last generation resins that, thanks to the use of nanotechnology (NTM), make the surface extraordinary from a mechanical, aesthetic and functional point of view (colour-core).
BEIGE LUXOR
BEIGE ARIZONA
INGO BLACK
ORINOCO COCOA
BLUE FES
BROMO GREY
JAIPUR RED
COMODORO GREEN
LONDON GREY
ANTRIM GREY
EFESO GREY
MALÈ WHITE
KOS WHITE
Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials.
OAK WITH KNOTS
ALPINE WHITE OAK
ECOWOOD TEAK
ECOWOOD DATUK EBONY (10.44)
ECOWOOD INDIAN ROSEWOOD (10.23)
SMOKED OAK
CANALETTO WALNUT U.S.
AMERICAN ELM
ECOWOOD XILO 2.0 STRIPED BLACK (18.04)
ECOWOOD XILO 2.0 PLANKED GREY (18.23)
ECOWOOD XILO 2.0 PLANKED SAND (18.22)
GREY-GRAPHITE-OAK
ASH-GREY-OAK
OAK
FOSSIL OAK
AISI 304 box section stainless steel sheet, orbital satin (Orbital Steel). It is an irregular steel grain pattern, obtained by using an orbital sander which gives the stainless steel a vintage look. EXCLUSIVE FINISH FOR BOFFI
O_STEEL SILVER
O_STEEL
Very compact surface composed of quartz, materials used to produce glass and ceramic, treated with Sinterized Particle Technology and ultra-compaction process.
MICRON
ALBARIUM
ARGENTIUM
ZENITH WHITE
DOMOOS
SIRIUS BLACK
Composite material made of high-purity minerals, by using Full Digital technology. “Natural” matt finish. The decorative design is on the front surface only. Features: - Surface: smoother-feeling texture and total control over the design, leading to outstanding visual properties. - Hygienic and nontoxic: Because it has a non-porous surface, this prevents the build-up of bacteria or mould. - Resistant: It is highly resistant to stains, heat, frost, thermal shock, scratches and impacts, ultraviolet rays and has a low water absorption rate. - Ecological: -70% savings on water consumption and -90% reduction in atmospheric emissions during the production process. 50% made with recycled materials.
YORK
NEWLYN
BLACK POINTS (Exclusive Boffi finish)
BLACK CROSS (Exclusive Boffi finish)
CAMEL POINTS (Exclusive Boffi finish)
CAMEL CROSS (Exclusive Boffi finish)
KANRAN (Exclusive Boffi finish)
SURREY (Exclusive Boffi finish)
DEVON (Exclusive Boffi finish)
BIHARA (Exclusive Boffi finish)
BLACK
GREY
CAMEL
WHITE
Wood layers, with support made of strip wood. Boffi uses only wood from not primary forests, to guarantee an adequate restoration of the renewable raw materials. Doors and panels have vertical grain. The “old“ grey pinewood consists of pinewood solid boards recycled from renovation of old houses, barns and huts. The characteristic grey tone of this material is obtained by specific painting cycles, which give the typical “old” aspect to this wood. Possible cracks and deformations have to be considered characteristic part of the product. Since these pieces are very unique, they have the typical appeal of “imperfect things“ and they clearly display sign of times and bad weather; therefore they show deformations and wrinkles strength. Worktops obtained with old wooden boards offer a clear example of the wood vitality and instability. For this reasons each piece in solid wood has to be considered considered “unique“ and different from all the other ones.
CANALETTO LIGHT WALNUT
SMOKED DYED OAK SW
OLD GREY PINEWOOD
THERMO TREATED OLIVATO ASH WOOD SW
CANALETTO LIGHT WALNUT "SAWN-EFFECT"
AMERICAN ELM SW
GREY-GRAPHITE OAK SW
AISI 304 box section stainless steel sheet.
MATT-SATIN
It is a Solid Surface, non-porous and homogeneous, composed for about 1/3 of acrylic resin (polymethyl methacrylate or PMMA) and for about 2/3 of natural minerals consisting mainly of aluminium trihydrate (ATH), which is a mineral extracted from the bauxite used to produce aluminium.
WHITE
Natural material extracted from quarry. Matt finish. The natural stones used by Boffi for the production of tops, panels, back panels, sinks, washbasins or bathtubs are always given a dedicated stain and oil-repellent and waterproof treatment to guarantee a high protection.
QUARTZITE BRECCIA IMPERIALE
VERDE ALPI MARBLE
ROSSO LEPANTO MARBLE
ITALIA GREY MARBLE
QUARTZITE SPIDER BLACK
SUPERWHITE MARBLE
APPLE BLOSSOM WHITE LASA MARBLE
QUARTZITE CALACATTA
GREY CARNICO MARBLE
GREY STONE MARBLE
EMPERADOR DARK MARBLE
BLACK COSMIC GRANITE
ABSOLUTE BLACK ZIMBABWE GRANITE
WHITE CARRARA MARBLE
GREY LAVA STONE
LASERMAT
WOOD VENEER
O_STEEL
DEKTON® COMPOSITE
MDI COMPOSITE
SOLID WOOD
STAINLESS STEEL
CORIAN®
STONE-MARBLE-GRANITE
PLINTH
Characteristics
Made of extruded aluminium profile.
Height
80 - 100 – 120 MM
Finishes
-
PAINTED MATT WHITE
-
STAINLEES STEEL
-
PAINTED MATT BLACK
-
silcolak
-
ecolak
-
clay
-
easy-metals
-
metals
Height
80 MM
Depth
830 / 900 / 980 / 1200 / 1260 / 1500 / 1800 MM
Width
min. 900 MM / max 3000 MM
Height
90 MM
Depth
980/1260/1435 MM
Width
Linead Sliding 1800 / max 3000 MM - Diagonal Sliding 1200 / max 1500 MM
Request More Info
Complete the Indoor kitchens Xila
Projects Made With Xila
View More
